How to make pompom for fashion

How to make pompom tutorial

Cutting two circles cardboad, see the picture ( two equal circles)

Around with wool

Around until as you want.

Using scissors cut it into two part of two cardboards (in the middle)


Tie the wool at the middle, we have a pompom.






Photo: blog.163.com

Read More

Craft hair accessories: The Hair Bow tutorial

Craft hair accessories: The Hair Bow tutorial

Hello, all of my blog friends! Guess what? My weekend has had an early start! Yes, there are definite perks to working at a Christian college. Good Friday, here I come.

I have been seriously lacking in creative projects recently, so I decided that in honor of my new niece I would share one of my absolute favorite crafts to make: hair bows.

So....here are the simple steps to making adorable, professional looking hair bows for all the little girls in your life (speaking of which, I'm pretty sure every pregnant person I know is having a girl). Yes, I'm spilling all of my secrets. Feel special. 

The Simple Hair Bow:
Supplies:
-Scissors
-Hot Glue Gun
-Jewelry Wire
-Fray Check
-Hair Clip
-Wax Paper
-Ruler or Yardstick
-30 inch long piece of 1 1/2 inch wide ribbon
-8 inch long piece of 1 1/2 inch wide ribbon

Step 1: Drape the longest piece of ribbon over your hand, wrapping twice so that the ends of the ribbon face opposite directions.

Step 2: Place the folded ribbon on a flat surface.

Step 3: Gather and pinch the center of the ribbon to create a bow. (Sorry about the blurry picture....I looked after I had finished the bow.) Wrap the center of the bow with jewelry wire to hold in place. Don't worry if it doesn't look perfect right away, you can pull and mess with the ribbon once the wire is in place to get it looking like a bow.

Step 4: Take the 8" piece of ribbon and fold one half over the other.

Step 5: Create a knot by pulling the top half up through the center loop.

Step 6: Place and hot glue the knot over the center wired part of the hair bow.  Wrap ribbon around the back, hot glue, and trim off the excess ribbon.

Step 7: Hot glue the top of an alligator clip or hair clip and attach the hair bow. Be sure to place wax paper in the hair clip so you don't glue it shut!

Step 8: The last and probably most important step is to fray check the ends of the bow. We don't want unraveled ribbon, people. Fray check is your new bestie.

Ta-da! A cute and simple hair bow.

The 3-Layered Hair Bow (my favorite)

If you like huge hair bows, this bow is for you!

Supplies:
-Scissors
-Hot Glue Gun
-Jewelry Wire
-Fray Check
-Hair Clip
-Wax Paper
-Ruler or Yardstick
- 3, 19 inch long pieces of 1 1/2 inch wide ribbon
-8 inch long piece of 1 1/2 inch wide ribbon

Step 1: Take one piece of 19" long ribbon.  Overlap as shown below.

Step 2: Pinch the center of the ribbon and hold in place by wrapping jewelry wire around the middle.

Step 3: Repeat Steps 1 and 2 for the remaining 19" pieces of ribbon. Your bows should look like this when you finish.

Step 4: Stack the 3 bows on top of each other. I usually stack them in a clockwise direction so that they don't lay directly on top of each other. Wrap jewelry wire around the center of all 3 bows.

Step 5: Repeat Steps 4-8 in the above directions to make a center knot and complete the bow.

And you should get something like this when you're done!

Love :).

The Hair Bow

Hello, all of my blog friends! Guess what? My weekend has had an early start! Yes, there are definite perks to working at a Christian college. Good Friday, here I come.

I have been seriously lacking in creative projects recently, so I decided that in honor of my new niece I would share one of my absolute favorite crafts to make: hair bows.

So....here are the simple steps to making adorable, professional looking hair bows for all the little girls in your life (speaking of which, I'm pretty sure every pregnant person I know is having a girl). Yes, I'm spilling all of my secrets. Feel special.

The Simple Hair Bow:
Supplies:
-Scissors
-Hot Glue Gun
-Jewelry Wire
-Fray Check
-Hair Clip
-Wax Paper
-Ruler or Yardstick
-30 inch long piece of 1 1/2 inch wide ribbon
-8 inch long piece of 1 1/2 inch wide ribbon

Step 1: Drape the longest piece of ribbon over your hand, wrapping twice so that the ends of the ribbon face opposite directions.

Step 2: Place the folded ribbon on a flat surface.

Step 3: Gather and pinch the center of the ribbon to create a bow. (Sorry about the blurry picture....I looked after I had finished the bow.) Wrap the center of the bow with jewelry wire to hold in place. Don't worry if it doesn't look perfect right away, you can pull and mess with the ribbon once the wire is in place to get it looking like a bow.

Step 4: Take the 8" piece of ribbon and fold one half over the other.

Step 5: Create a knot by pulling the top half up through the center loop.

Step 6: Place and hot glue the knot over the center wired part of the hair bow.  Wrap ribbon around the back, hot glue, and trim off the excess ribbon.

Step 7: Hot glue the top of an alligator clip or hair clip and attach the hair bow. Be sure to place wax paper in the hair clip so you don't glue it shut!

Step 8: The last and probably most important step is to fray check the ends of the bow. We don't want unraveled ribbon, people. Fray check is your new bestie.

Ta-da! A cute and simple hair bow.

The 3-Layered Hair Bow (my favorite)

If you like huge hair bows, this bow is for you!

Supplies:
-Scissors
-Hot Glue Gun
-Jewelry Wire
-Fray Check
-Hair Clip
-Wax Paper
-Ruler or Yardstick
- 3, 19 inch long pieces of 1 1/2 inch wide ribbon
-8 inch long piece of 1 1/2 inch wide ribbon

Step 1: Take one piece of 19" long ribbon.  Overlap as shown below.

Step 2: Pinch the center of the ribbon and hold in place by wrapping jewelry wire around the middle.

Step 3: Repeat Steps 1 and 2 for the remaining 19" pieces of ribbon. Your bows should look like this when you finish.

Step 4: Stack the 3 bows on top of each other. I usually stack them in a clockwise direction so that they don't lay directly on top of each other. Wrap jewelry wire around the center of all 3 bows.

Step 5: Repeat Steps 4-8 in the above directions to make a center knot and complete the bow.

And you should get something like this when you're done!

Love :).

Read More

Flowers Paper crafts: Cupcake Wrapper Garland Tutorial

Cupcake Wrapper Garland Tutorial

I’m back today with One Charming Party’s cupcake wrapper garland tutorial used on their party shown here yesterday. Cupcake wrapper garlands have been really popular over the blogosphere for the last couple of years. This tutorial shows how easy it is to create this crafty decorative embellishment.  Enjoy!   Photography by Nicole Hill Gerlulat.

Read More

Paper crafts for kids: Pinwheels tutorial

  

You are going to love this next feature. Remember the incredible editorial shoot that we featured a few weeks back, designed by the forever talented Carter & Cook? Well, we had so many requests for more information on the adorable pinwheels that posh paperie crafted, we’ve put together a pretty great DIY feature. Elizabeth, the genius behind the detail, was sweet enough to give us perfect step-by-step info, along with really easy to follow pictures, beautifully captured by Jackie Wonders.

Step #1: Supplies.

Pick your paper and buttons. *Hint*: text weight paper works best. Choosing coordinating patterns and colors for the paper is fun, and choosing different sizes and shapes in the buttons is cute, too. Choose scissors or a paper cutter, and adhesive. Cut 2 strips of paper, equal length and width, depending on the size of the pinwheel you want (thicker strips = larger pinwheel).

Steps #2 and #3: Folding + Combining.

Evenly fold (like an accordion) the 2 strips of paper. Make sure the widths match! (Note: smaller folds make tighter pinwheels. Larger folds are more loose and show more of the pattern. We like to make several of each size – makes for an adorable display). Line up one end of the folded accordion with the end of the other accordion. Fit together and adhere securely. Permanent adhesive squares work nicely, and lie flat.

Step #4: Securing.

Pull the loose ends of the accordion strip around towards each other and adhere securely. The pinwheel will look like a cardstock “circle” (similar to the coffee sleeves they give you at Starbucks). You will need to pop the pinwheel out and push it down (work with it until it looks like a pinwheel should look), holding it in place with your fingers. In the photo, the paperweight is doing the job of holding the pinwheel in place.

Step #5: Finishing Touches.

Choose your button and secure *tightly* with glue dots (you may need to use several!). Note: we recommend weighing the pinwheels down for several hours once they are fully assembled). This will help to ensure that they are secure.

Read More